ProMinent Sigma X Operating Instructions Manual page 42

Basic set-up principles
Confirming an entry
Exiting a menu option without confirming it
Returning to a continuous display
Changing adjustable variables
a)
5432
5432
Fig. 29: a) Changing from one figure to its initial figures; b) Changing the figure; c) Returning from the last figure to the
(complete) figure (to correct a wrong figure, for example).
42
6. To complete the setting: press
Alternatively: wait 60 seconds or exit the
'End' .
key or using
[Clickwheel] .
Briefly press the
ð The software switches to the next menu point or back to the
menu and saves the entry.
[Back] .
Press
ð The software switches to the next menu point or back to the
menu without saving anything.
[Menu] .
Press
ð The software cancels the entry and switches to a continuous
display without saving anything.
b)
5 432
Changing a (complete) number
[Clickwheel] .
Turn the
ð The value of the figure highlighted is raised or lowered.
Changing figures
1. To adjust the value of a figure digit-by-digit, press
ð The first figure is highlighted - see Figure above, point a)
2. To adjust the value of a figure, turn the
3. To move to the next figure, press
point b).
[] Menu.
'Menu' via the [Menu]
c)
543 2
5432
[Priming] .
[Clickwheel] .
[Priming] - see above Figure,
B0777