ProMinent Sigma X Operating Instructions Manual page 17

Identifier Meaning
The pump was manually stopped using the
The pump was remotely stopped (Pause) - via the "External" socket.
The pump was stopped by an error.
Only with cyclical batch metering: the pump is waiting for the next cycle.
'memory'
Only in
The "Stroke memory" auxiliary function has been set.
The pump is in
The
The pump is in
The
'AUX'
The pump is currently pumping at auxiliary capacity and/or auxiliary frequency.
The diaphragm rupture warning system is disabled.
dia
off
A "Flow Control" metering monitor is connected.
The timer is active.
Only with
Only with
The pump is in the
'CONTACT' and 'BATCH' operating modes:
'ANALOGUE' operating mode.
'Curve è linear' type of processing is set.
'ANALOGUE' operating mode.
'Curve è Upper side band' type of processing is set.
'Password' : the pump software is locked.
'Password' : the pump software has been temporarily unlocked.
'Menu' (Set up).
Overview of equipment and control elements
[STOP/START] key.
Further explanations can be found in the "Trouble‐
shooting" chapter.
17