Extron electronics Multi-Graphic Processor MGP 464 User Manual page 87

Command/response table for IP SIS commands (continued)
Command
Mail server setup commands
Set mail server IP, unit domain name 24
Read mail server IP, unit domain name
Directory commands
Change/create directory
N A directory does not actually exist until a file has been copied into the path.
Move back to root directory
Move up one directory
View current directory
Reset (Zap) / Erase commands
Erase user-supplied Web page/file
24 28
Erase current directory and its files 24 28
Erase current directory and subdirectories
Erase flash memory
Reset all device settings to factory default
Absolute system reset 24
Absolute reset retaining IP
24
ASCII (Telnet) URL Encoded (Web)
(host to processor) (host to processor)
E X1$ X1% } X1$
, CM W %2C
24 28
E } X1$
CM W %2C
E }
{path} / {directory}/CJ
W {path} / {directory}/CJ
E } |
/ CJ W %2F CJ
E }
.. CJ W %2E %2E CJ
E } |
CJ W CJ
E }
{filename} EF W {filename} EF
E } |
/ EF W / EF
24 28
E } |
// EF W // EF
E } |
ZFFF W ZFFF
24
E } |
ZXXX W ZXXX
E } |
ZQQQ W ZQQQ
E } |
ZY W ZY
PRELIMINARY
Response
(Processor to host)
X1% | X1$ X1% ]
CM Ipm • ,
X1% | X1$ X1% ]
CM ,
|
Dir • {path} / {directory} /
]
Dir • /
|
Dir • {path} / {directory} /
]
{path} / {directory} /
| ]
Del • {filename}
]
Ddl
]
Ddl
]
Zpf
]
Zpx
]
Zpq
]
Zpy
Additional description
X1$
= IP address, format xxx.xxx.xxx.xxx.
X1%
= mail domain name.
]
]
No IP-related settings are reset.
Reset all settings/memories, including all
adjustments, the IP address, and the subnet
mask, to the factory default values. The IP
address is reset to 192.168.254.254, and the
subnet mask is set to 255.255.0.0 (identical to
reset mode 5).
Same as Absolute system reset (EZQQQ)
except that IP settings, including IP address,
subnet mask, gateway address, unit name,
DHCP setting, and port mapping (Telnet/
Web/Direct Access) are excluded in order
to preserve communication with the device.
(Recommended after a firmware update.)