Extron electronics Multi-Graphic Processor MGP 464 User Manual page 81

Command/response table for IP SIS commands (continued)
Command
Event control (continued)
Start events
24 27
Stop events 24 27
Read number of events running
E-mail
Configure e-mail events 24
Example:
View e-mail events
Send e-mail (file named in mail box)
Send e-mail (using a different file)
Web browser specific commands
Read response from last URL command
ASCII (Telnet) URL Encoded (Web)
(host to processor) (host to processor)
E } |
1AE W 1AE
E } |
0AE W 0AE
E } |
AE W AE
X4% X4^ X4& } X4% X4^
, , CR W , ,
E }
5, jdoe@extron.com, 7.eml CR
W5 %2C jdoe %40 extron %2E xom %2C 7 %2E eml CR
X4% } X4% |
CR W CR
E X4% } X4% |
SM W SM
E X4% X7) X4& }
, , SM
X4% X7)
W %2C
E } |
UB W UB
PRELIMINARY
Response
(Processor to host)
]
Ego
]
Est
]
Enm##
With tagged response – verbose modes 2 and 3:
]
Enm #####
X4& | X4% X4^ X4& ]
CR Ipr , ,
lpr5, jdoe@extron.com, 7.eml
X4^ X4& ]
,
X4% ]
Eml
X4& }
%2C SM
X4% ]
Eml
]
Response from command
Additional description
Initiate all programmed events.
Stop all programmed events.
## = 2-digit number
Enm ##### = 5-digit number
X4%
= e-mail event number (1 through 64).
X4^
= e-mail recipient's address.
X4&
= name of e-mail file to be sent (first line
of the file is the subject; the rest is the body of
the e-mail).
|
]
For e-mail event 5, send file 7.eml to
jdoe@extron.com.
X7)
= number inserted into the e-mail
message if the .eml file has an embedded
E }
command.