Extron electronics Multi-Graphic Processor MGP 464 User Manual page 67

Command/response table for SIS commands (continued)
Command
Image size and position
Set image size and position
The variables must be entered in the following order: Horizontal position, vertical position, horizontal size, vertical size.
N
View image size and position
Zoom mode (window)
Zoom in
Zoom out
Zoom mode (image)
Zoom in
Zoom out
Window presets
Recall window preset without input
Recall window preset with input
Save window preset
Preset preview
ASCII (Telnet) Response
(host to switcher) (switcher to host)
E X50@ X52! X52! X52# X52#
, * * * I Y
Ixy
E X50@ } X50@
I Y
X50@ X50@
1 * + {
X50@ X50@
1 * – {
X50@ X50@
2 * + {
X50@ X50@
2 * – {
X51#
1 * . Rpr 1 *
X51#
2 * . Rpr 2 *
X51#
2 * , Spr 2 *
E X51# X50@ }
* XY Wxy
PRELIMINARY
Additional description
}
X50@ X52! X52! X52# X52# ]
, * * *
Set position and size of the image in window
X50@
= 0 through 4; 0 = all windows.
X52!
For
0 = 2048; limits are ± the output resolution.
X52#
For
Minimum = 1/16 the size of the active input area.
Maximum = double the active output area for 200%
zoom.
X52! X52! X52# X52# ]
, * * *
View position and size of the image in window
X50@
.
]
Wzm Increase the size of window
aspect ratio constant.
]
Wzm Decrease the size of window
the aspect ratio constant.
]
Izm Increase the size of the image in window
while keeping the aspect ratio constant.
]
Izm Decrease the size of the image in window
while keeping the aspect ratio constant.
X51# ]
Recall window preset
X51#
= 1 through 128.
X51# ]
Recall window preset
X51# ]
Save window settings to a preset at location
X51# X50@ X52& X52! X52! X52@
* * * * *
View the size, priority, and position of window
X50@
saved as preset
X52&
= 1 through 4; 1 = top priority
X50@
:
:
X50@
while keeping the
X50@
while keeping
X50@
X50@
X51#
without input settings.
X51#
with input settings.
X51#
.
X52@ ]
*
X51#
.
.