Extron electronics Multi-Graphic Processor MGP 464 User Manual page 83

Command/response table for IP SIS commands (continued)
Command
IP setup commands (continued)
Set daylight saving time
24
Read daylight saving time
Set DHCP on
24
Set DHCP off 24
View DHCP mode
Set IP address 24
Read IP address 24
Read hardware address (MAC)
Set subnet mask
24
Read subnet mask
Set gateway address 24
Read gateway address
ASCII (Telnet) URL Encoded (Web)
(host to processor) (host to processor)
E X3$ } X3$ |
CX W CX
E } |
CX W CX
E } |
1DH W 1DH
E } |
0DH W 0DH
E } |
DH W DH
E X1$ } X1$ |
CI W CI
E } |
CI W CI
E } |
CH W CH
E X1( } X1( |
CS W CS
E } |
CS W CS
E X1$ } X1$ |
CG W CG
E } |
CG W CG
PRELIMINARY
Response
Additional description
(Processor to host)
X3$ ] X3$
Ipx is the daylight saving time of day.
Daylight saving time (DST) is a one-hour
offset that is observed in the USA and parts of
Europe and Brazil. For X3$:
0 = off/ignore
1 = on in northern hemisphere
2 = on in Europe
3 = on in Brazil
For example, California uses GMT -8:00
from April to October and -7:00 GMT from
November to March. DST should be turned
off in Hawaii, American Samoa, Guam, Puerto
Rico, the U.S. Virgin Islands, the eastern time
zone part of Indiana, and Arizona (excluding
the Navajo Nation).
X3$ ]
]
Idh1
]
Idh0
X% ] X%
Idh = DHCP on/off status: 0 = off; 1 = on.
X1$ ] X1$
Ipi • = IP address (xxx.xxx.xxx.xxx). Leading
zeros in each of the four fields are optional in
setting values.
X1$ ]
Leading zeros in each of the four fields are
suppressed in returned values.
X1* ] X1*
= hardware media access control (MAC)
address (xx-xx-xx-xx-xx-xx).
X1( ] X1(
Ips • = subnet mask (xxx.xxx.xxx.xxx). Syntax
is the same as for IP addresses. Leading zeros
are optional in setting values.
X1( ]
Leading zeros are suppressed.
X1$ ] X1$
Ipg • = IP address (xxx.xxx.xxx.xxx). Leading
zeros are optional.
X1$ ]