Updating Using The Firmware Loader - Extron electronics Multi-Graphic Processor MGP 464 User Manual

Firmware Upgrade Guide, cont'd
4.
5.

Updating using the Firmware Loader

An alternative way to update the MGP's firmware is to download and run the
Firmware Loader software.
1.
2.
3.
4.
5.
B-8 MGP 464 • Firmware Upgrade Guide
Double-click on the firmware file icon. The firmware uploading process
begins. While the firmware is loading, a progress bar is displayed:
Firmware update progress bar
When the firmware update is complete, the progress bar closes.
Download the Firmware Loader installer executable file to your computer.
a. On the Extron Web page, click the Download tab.
b. On the Download Center page, click Software on the left sidebar menu.
c. Locate the "Firmware Loader" line and click the Download link at the far
right.
d. Follow the instructions on the download screens to save the installer file
to your computer.
Locate the Firmware Loader executable file in your computer's file system
and open it.
Follow the instructions on the Installation Wizard screens to install the
Firmware Loader on your computer. The installer program places the
Firmware Loader file, "FWLoader.exe" at the following location:
c:\Program Files\Extron\FWLoader
(If the Extron and FWLoader folders do not yet exist in your Program Files
folder, the installer creates them.)
Access the FWLoader.exe file via your desktop Start menu by making the
following selections:
Start > All Programs > Extron Electronics > Firmware Loader > Firmware
Loader
On the first screen that appears, select the tab for the desired connection type
and enter the parameters for your MGP, and click OK.