Common Battery; Dry Contact Setting; Input Dry Contact: 1 - Delta Modulon DPH Series User Manual

Item
Common
Battery

7.10.6 Dry Contact Setting

Path:
SETUP
In the DRY CONTACT SETTING screen*
(normally open) or NC (normally closed) for each of the input and output dry contacts can
Delta customer service for assistance.
DRY CONTACT SETTING
Input Dry
Contact No.
Input Dry Contact 1
Input Dry Contact 2
Input Dry Contact 3
Input Dry Contact 4
Modulon DPH Series
If the parallel UPSs that have the same parallel group ID No. need to share
common batteries, please select 'Enable' for the 'Common Battery' setup
item. Otherwise, the function of battery abnormality detection will fail. For
more information about common battery, please refer to
1
NOTE:
* means that the Administrator password is needed. For password
information, please refer to
UPS-1.1 MEASUREMENT SETUP
Dry Contact Setting
Event
1
2
3
4
Select one of the following events as
the setting for each input dry contact.
1. None
2. Generator status
3. Battery ground fail
4. External battery breaker detection
5. Charge Off (Positive)
6. Charge Off (Negative)
Description
.
1
(shown in the figure below), the event, NO
MAINTENANCE LOG IN
Administrator
INPUT OUTPUT
Type
None
None
None
None
Event Selection
7-38
.
10:15
May 25,2018
EVENT LOG
Bypass
Normally Open
Normally Open
Normally Open
Normally Open
Set up NO (normally
open) or NC (normally
closed) for each input
dry contact.
Type