Delta Modulon DPH Series User Manual page 78

5.1 Before Installation and Wiring
Please read this user manual thoroughly before installation, wiring and operation.
Only authorized Delta engineers or service personnel can perform installation, wiring,
panel & cover removal, maintenance and operation. If you want to execute any action
mentioned above by yourself, the action must be under the supervision of authorized
Delta engineers or service personnel.
If you use a forklift or other equipment to move the UPS, please make sure its load
The UPS must be connected with at least one external battery cabinet (user-supplied,
5.2 Installation Environment
Install the UPS indoors. Do not place it outdoors.
Make sure that transportation routes (e.g. corridors, door gates, elevators, etc.) and
installation area can accommodate and bear the weight of the UPS, external battery
cabinet(s) and handling equipment. Please refer to
information.
Table 5-1: UPS Floor Weight Loading Table
Capacity
Power
Module Q'ty
Weight
Weight
Loading
The UPS allows cable entry from the top or bottom. Please leave adequate space for
wiring, maintenance, and ventilation as follows:
1. 1500 mm (59.06") from the front of the UPS.
2. 1000 mm (39.4") from the back of the UPS.
3. 1000 mm (39.4") from the top of the UPS.
Modulon DPH Series
UPS 100kVA/
100kW
2
UPS 383 kg
(844.4 lb)
580.3 kg/m
(118.9 lb/ft
.
for relevant information.
DPH Series UPS
150kVA/ 200kVA/
150kW
3
419 kg
(923.7 lb) (1003.1 lb)
2 2
638.4 kg/m 689.4 kg/m
2 2
) (130.8 lb/ft ) (141.2 lb/ft
5-2
250kVA/
200kW 250kW
4 5
455 kg 491 kg
(1082.5 lb)
2
743.9 kg/m
2
) (152.4 lb/ft
-
300kVA/
300kW
6
527 kg
(1161.8 lb)
2 2
798.5 kg/m
2 2
) (163.5 lb/ft )