Delta Modulon DPH Series User Manual page 133

6
After 20 seconds of LCD initialization, the LCD will enter the Main Screen shown in
and the tri-color LED indicator will illuminate yellow.
UPS-1.1 MEASUREMENT
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
System Status
90 %
5 mins
EMS
7
Tap the ON/ OFF Button (
to power on the UPS. Please select 'YES'.
UPS-1.1 MEASUREMENT
Power Flow
8
After selection of 'YES' to start up the UPS's inverter, each power module will start up
and perform self-inspection and the LED indicator of the power module will illuminate
green. After the self-inspection is completed, the UPS will automatically transfer to run
in Battery mode. At this moment, the tri-color LED indicator illuminates yellow and the
following screen appears.
User Login
SETUP MAINTENANCE LOG IN
User
) and the following screen will pop up to ask if you want
SETUP MAINTENANCE LOG IN
User
POWER ON ?
No
Yes
6-9
6
10:15
2
May 25,2018
WARNING
Standby
Load
0 %
10:15
May 25,2018
EVENT LOG
Standby
UPS Operation
ON/ OFF
Button