Battery Replacement - Delta Amplon Series User Manual

NOTE :
The REPO port can also be used for ROO application, which allows you
remotely turn on/ off the inverter. If you need detailed ROO information
or ROO setup service, please contact your local dealer or customer
service.
Step 6: Turn-on of the UPS
Press the ON/ MUTE button on the front panel for two seconds to power on
the UPS.
NOTE :
UPS will be available for full runtime capability after the initial five-hour
charging.
Step 7: Installation of software
For optimal system protection, install UPS monitoring software to fully config-
ure UPS. Please download the software from
http://datacenter-softwarecenter.deltaww.com

2.4 Battery Replacement

WARNING :
Consider all warnings, cautions, and notes before replacing batteries.
NOTE :
Upon battery disconnection, equipment is not protected from power
outages.
Chapter 2
10
Installation and Setup