Temperature Humidity Di1 ~ Di4 - Delta Modulon DPH Series User Manual

(1) The status of the EMS 1000 (EnviroProbe) device (ID #) has been set as 'Enable'
(please refer to
UPS or the connection cable may be damaged.
(2) The ID # setting is wrong. Please refer to
At this time, the warning message 'The EMS 1000 ID # Communication Fail' shown in
UPS-1.1 MEASUREMENT
WARNING
2 Touch Panel Comm Loss
1 PFC#1 Fan Fault
2. After connection of the EMS 1000 (EnviroProbe) to the UPS, if you don't set the status
of the EMS 1000 (EnviroProbe) device (ID #) as 'Enable' (please refer to
), the information of the EMS 1000 (EnviroProbe) device (ID #) will not show on
the EMS screen.
If none of the status of the EMS 1000 (EnviroProbe) devices (ID #) is set as 'Enable'
(please refer to
UPS-1.1 MEASUREMENT
EMS
EMS
ID Title
), but the device (ID #) is not connected to the
SETUP MAINTENANCE LOG IN
Warning Administrator
Log
Please contact service personnel for more information.
Please contact service personnel for more information.
), the EMS screen will show as follows.
SETUP MAINTENANCE LOG IN
Administrator
Temperature Humidity DI1
7-29
7 LCD Display & Settings
.
10:15
2
May 25,2018
WARNING
On-Line
Solution
1
10:15
May 25,2018
EVENT LOG
Standby
Normal Warning Alarm Off
DI2 DI3 DI4