Delta Modulon DPH Series User Manual page 74

4.1.11 Auxiliary Power Cards
The UPS has two auxiliary power cards. Each card has one LED indicator. Please see
If the auxiliary power card works normally, its LED indicator will illuminate green. If the
DISPLAY
EXT. BATT
TEMP.
BT1 BT2
REPO
NC NO
BT3 BT4
4.1.12 Battery Start Buttons
Please refer to
buttons' relevant operation information, please refer to
DISPLAY
EXT. BATT
TEMP.
BT1 BT2
REPO
NC NO
BT3 BT4
4.2 Communication Interfaces (II): at the Rear of the Touch
Panel
The following communication interfaces are located at the rear of the touch panel. Please
refer to
Modulon DPH Series
for their location.
WARNING:
When replacing, remove only one auxiliary power card at a time to avoid power
interruption.
O/P DRY I/P DRY
EXT.SWITCH
CONTACT CONTACT
STATUS
S1 S2 P1 P2 P3 P1 P2
S3 S4 P4 P5 P6 P3 P4
for the location of battery start buttons. For the battery start
.
EXT.SWITCH O/P DRY I/P DRY
STATUS CONTACT CONTACT
S1 S2 P1 P2 P3 P1 P2
S3 S4 P4 P5 P6 P3 P4
and the table below.
PARALLEL
PARALLEL USB
PARALLEL
PARALLEL USB
4-14
Auxiliary Auxiliary Power Card's
Power Card LED Indicator
RS-232
Auxiliary Auxiliary Power Card's
Power Card LED Indicator
Battery Start Button
RS-232
Battery Start Button
BATT.
START
BATT.
START
BATT.
START
BATT.
START