Sensor; Input Contact: 1 - Delta Modulon DPH Series User Manual

EMS SETTING
Item

SENSOR

INPUT
CONTACT
Modulon DPH Series
UPS-1.1 MEASUREMENT SETUP
EMS Setting
ID
ID 0
Input
NO/NC
Contact
Normally Open
1
Normally Open
2
Normally Open
3
Normally Open
4
NOTE:
After connecting the optional EMS 1000 (EnviroProbe) to the UPS, you have to
manually set both ID and Status to enable the EMS function of the UPS. Settings
for the other items can be adjusted according to your needs; the default values are
Sub Item
ID
Title
Status
Temperature
Humidity
Input Contact 1
Input Contact 2
Input Contact 3
Input Contact 4
MAINTENANCE LOG IN
Administrator
INPUT
SENSOR
CONTACT
Title
EMS0
Title
Security
Leakage
Fire
Smoke
Set the ID # (ID 0/ ID 1/ .../ ID 15) according to the ID DIP
switch setting of the EMS 1000 (EnviroProbe) device.
NOTE:
If the ID # setting is wrong, the warning
message 'The EMS 1000 ID # Communication
Fail' will appear.
Set the title for each EMS 1000 (EnviroProbe) device.
The status 'Enable/ Disable' determines whether or not
the LCD shows the EMS information of the EMS 1000
(EnviroProbe) device (ID #) on the screen.
Set the temperature (°C) values for Alarm/ Warning/
Recovery.
Set the humidity (%) values for Alarm/ Warning/ Recovery.
1. Set the input contact as Normally Open (NO)/ Normally
Closed (NC).
2. Set the title for each input contact.
3. Set the event type as None/ Information/ Warning/ Alarm.
7-46
10:15
May 25,2018
EVENT LOG
On-Line
Status
Disable
Event Type
Warning
Warning
Warning
Warning
Description