Modbus Configuration [1731] - ProMinent Splash Control Pro 2 Assembly And Operating Instructions Manual

Communication programming instructions

7.5.1 Modbus configuration [1731]

62
The Ethernet is not yet available. The MODEM ETHERNET and
MODBUS SLAVES keys are each accessible depending on the
communication configuration.
Press the Modbus symbol (l.) to open the following screen.
I.
Modbus settings
Modbus on RS485
Modbus RTU
Speed
Parity WITHOUT
Stop bit(s)
Address
Fig. 60: Modbus configuration [1731]
Do not forget to configure the Wi-Fi parameters if the device con‐
nected to your Modbus is a Wi-Fi type.
When a change has been made, the "Save" button (disk symbol)
appears, which you need to press to save your configuration.
Modbus TCP
Port
Simultaneous connection(s)
Peripheral Wi-Fi
2
1
Pseudo address
1
255
A3056