Extron electronics NAV E 101 DTP User Manual page 36

On Screen Display (OSD) pane
See figure 19. This pane shows the options for the OSD and screen saver on the HDMI
Output port (see on page 6) and streamed outputs. If you change any setting, either
B
directly or by clicking RESET (
to take change or CANCEL (
dialog box.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Figure 19. OSD Configuration Pane
OSD Type — Click the drop-down list to select among the OSD
1
options (see figure 20
• Input OSD (input connection details that can alert users of an
input change)
• Status OSD (general encoder details)
Disabled (no OSD)
•
NOTE: When Input OSD or Status OSD is selected, an extra control,
appears below
OSD Duration
Click or to increment or decrement the duration (from 1 to 500 in seconds) of
how long the OSD stays active or 501 Always on.
Screen Saver Mute — Click to toggle the Screen Saver Mute on (muted) and off
2
(unmuted) for the HDMI Output port (see
control sets whether the screen immediately enters low power mode (Screen Saver
Mute is off) upon loss of sync or displays the user-entered background image (see
Background Image,
4
Duration setting, .
3
NOTE: Allow Audio Only (see
disabled to use a screen saver.
Screen Saver Duration (available when Screen Saver [
3
(see figure 19 on page 27) Click in the Duration field and edit it as desired
or click or to increment or decrement the delay (in seconds) of how long the
screen saver stays active and streaming, before muting sync to a display. The valid
range is from 1 to 500 (seconds) or 501 Always on.
When Screen Saver Mute is unchecked (
501 Always on.
After the duration expires, the encoder drops the active sync, allowing the monitor to
turn off or enter low power mode.
), the SAVE button ( ) becomes selectable. Click SAVE
7 5
) to abandon the changes. Clicking either button closes the
6
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
on page 29 for on-screen typical displays).
.
OSD Type
on page 6) and streamed outputs. This
B
on page 29) for a period of time set by the Screen Saver
, Allow Audio only
4
), the duration automatically becomes
2
NAV E 101 DTP Encoder • HTML Operation
on page 25) must be
] is selected) —
2
28