Extron electronics NAV E 101 DTP User Manual page 43

5.
Communication settings
• Settings > General >
Device Details (name)
• Settings > Networking >
Network Connection
6.
FIRMWARE tab
Upgrade the encoder firmware as follows:
NOTES:
1.
2.
Select (click) the settings to restore (
figure 28, on page 32).
1
• Settings > General >
Device Details (location)
• Settings > General >
Date and Time
• Settings > Advanced
NOTE: Account password and custom image file are not backed up.
Click RESTORE ( ).
2
The encoder reports that it is
status bar that shows the progress of the Restore operation.
When the operation completes, the encoder reboots.
NOTE: You must reconnect to the encoder (see
Pages on page 15) if you have additional operations to perform.
• Firmware upgrade is disabled when the encoder is accessed via proxy from the
NAVigator.
• Upgrading the encoder firmware results in the unit rebooting.
• Valid firmware files have the .eff file extension. Any other file extension is not a valid
firmware update.
Click (see figure 29,
FIRMWARE
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 29. Tools — Firmware Function
Click ( ). An
2 Open
SELECT FILE
,
Configuration Communication
Configuration settings
• Input Config. > Video
• Input Config. > Audio
• Input Config. > Remote power
• Output Config. > Stream
• Output Config. > Loop Thru
• Output Config. > AES67 Audio
• Output Config. > OSD
• Output Config. > Screen Saver
and displays a
Rebooting
Opening the Embedded HTML
).
1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
dialog box opens (see figure 30
NAV E 101 DTP Encoder • HTML Operation
, or both; see
on page 36).
35