Extron electronics NAV E 101 DTP User Manual page 53

Date & Time
selection on the Device Settings page (see
The
Date & Time
a read-only pane that shows date and time settings (see figure 45). Click SET MANUALLY (
and SYNC WITH SERVER (
2
date and time can be edited by clicking the EDIT button (
"Set time manually" and figure 46 and
NOTE: Editing of these settings is disabled when the encoder is assigned to a
NAVigator and the EDIT button is unavailable for selection.
1 1 1 1 1 1 1 1 1 1 1 1 1 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3
Set Time Manually
Figure 45. Date & Time Selection
Set time manually
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Figure 46. Set Time Manually
) to switch between the views applicable to each selection. The
Sync time
and figure 48 on page 47).
3 3 3 3 3 3 3 3 3 3 3 3 3 3
NAV E 101 DTP Encoder • HTML Operation
figure 42 on page 43) opens
). An editable pane opens (see
3
2 2 2 2 2 2 2 2 2 2 2 2 2 2
Sync
)
1
45