Extron electronics NAV E 101 DTP User Manual page 32

Each pane has settings that can be changed by clicking the EDIT button (see
on page 23) in the appropriate pane. The selected dialog box opens (see "Stream pane"
8
below, Loop Thru pane on page 25,
on page 27, and On Screen Display (OSD) pane
Stream pane
See figure 15. If you change any of the settings in the
( through ), the button (
SAVE
1 4
CANCEL ( ) to abandon them. Clicking either button closes the dialog box.
6
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Figure 15. Stream Configuration Dialog Box
Bitrate (Mbps) — Set the
1
NOTE: Extron recommends leaving the bitrate at the default setting, 850 Mbps.
The bitrate is the rate at which the encoder transmits data. The bitrate affects the
video image quality. Decreasing the bitrate lowers the quality, increasing the bitrate
improves the quality.
Click and drag the slider control.
•
• Click the and
• Directly type a rate into the field.
Video Stream — Click to toggle Video Stream on (stream video) and off (do not
2
stream).
NAV Audio Stream — Click to toggle NAV Audio Stream on (stream NAV audio) and
3
off (do not stream).
NOTE: NAV Audio can only be routed to other Extron NAV products. Select NAV
Audio only when your system is interfacing solely with other NAV products and
the audio needs minimal processing.
AES67 Stream — Click to toggle AES67 Stream on (stream AES67 audio) and off (do
4
not stream).
NOTE: The AES67 standard allows for interoperability among AES67 capable
devices. Enabling AES67 audio allows the device to transmit an audio stream to a
third-party AES67 capable receiver.
Test Pattern pane
on page 28).
Stream Configuration
) becomes selectable. Click SAVE to take changes or
5
in one of three ways:
Bitrate
buttons.
NAV E 101 DTP Encoder • HTML Operation
figure 14,
on page 26, AES67 Audio
dialog box
pane
24