Using The Html Pages - Extron electronics NAV E 101 DTP User Manual

Using the HTML Pages

See
pages or functions:
1
2
3
4
5
6
7
8
9
¢
£
¤
¥
¦
figure 9 on page 17 and the following sections for detailed descriptions of the following
Menu icon — Toggles the links panel (items
INPUT CONFIGURATION link
information and the ability to change some input values (see
Page on page 19).
OUTPUT CONFIGURATION link
configuration information and the ability to change some streaming values (see
Configuration Page on page 23).
TIES link — Opens a panel that displays the status of the input to the encoder and the
streaming output (see Ties Page
TOOLS link
— Opens two pages that provide encoder and diagnostic tools (see
Pages on page 32).
MONITORING link — Opens a panel that shows system status information (see
Monitoring Page on page 39).
SETTINGS link — Opens a panel that provides access to many system settings (see
Settings Link on page 43).
Control panel Information indicator
box that displays the format, resolution, and rate of the input
and HDMI loop through output. Click anywhere outside the
dialog box to close the box.
LOOP THRU MUTES panel
(click) AUDIO, VIDEO, or SYNC to toggle the
mute on (do not output) and off (output) for the associated plane.
NOTE: The mute function is for the HDMI OUtput (loop through) port output only
(see on page 6). Video, audio, and sync are still streamed to the AV network.
B
Stream Status indicator
active ( ) or error ( ).
ID button — Click to display the ID on-screen display on the HDMI loop through port
(see ) and light the front panel ID LED (see
D
admin link — Click to display the
Sign Out to log out of the encoder HTML pages.
NOTES:
• The log in to the HTML pages automatically times out after
30 minutes of user inactivity.
• Signing out is disabled when the encoder is accessed via
proxy from the NAVigator (see the
Name banner — Normally displays the host name. Resting a cursor over this banner
changes the display from host name to the device name.
About link — Opens a pane that provides information about the NAV E 101 DTP (see
About Page on page 54).
through
2
— Opens a panel that provides input configuration
— Opens a panel that provides streaming output
on page 31).
— Opens a dialog
— Select
— Displays the AV stream output status of the encoder,
on page 11).
F
button. Click
Sign Out
NOTE on page 32).
NAV E 101 DTP Encoder • HTML Operation
) on and off.
7
Input Configuration
Output
Tools
18