Extron electronics NAV E 101 DTP User Manual page 44

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 30. Open Dialog Box
3. Navigate to the folder where you saved the firmware upgrade file (see figure 30,
Select the file.
4. Click ( ). The
Open
Open 2
top, with the selected firmware file identified (see figure 31,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 31. Device Tools Pane with Firmware File Identified
5.
Click ( ).
UPDATE 2
The encoder page displays a sequence that reports the progress as it uploads the file
(see figure 32, ), updates the firmware (
1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 32. Firmware Upload Progress
When the encoder reboots, the connection to it is momentarily lost and after a few seconds,
the browser displays the home page
continue to operate the encoder, you must reconnect (see
Pages on page 15).
dialog box closes and the Device Tools pane returns to the
), and then reboots (
2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
dialog box (see
Login
NAV E 101 DTP Encoder • HTML Operation
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1
).
1
).
3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
figure 8 on page 16). To
Opening the Embedded HTML
).
36