Extron electronics NAV E 101 DTP User Manual page 57

NOTE: ,
IP Address Subnet
is on.
DHCP
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
DHCP On
Figure 50. Editable Network Connection Pane
DHCP (see figure 50) — Click to toggle DHCP on and off. When DHCP is enabled, the
1
endpoint automatically receives network configuration parameters from a DHCP server.
If no DHCP server is available, the endpoint remains on Link local IP (see
IP Address, Subnet, and Gateway — Click in these fields and type in values to enter
2
the appropriate connection values for your encoder.
DNS (Domain Name System) Server — Click in this field and type in the name of the
3
domain name server.
DNS suffix — Click in this field and type the valid domain name suffix of the domain
4
name server.
SAVE and CANCEL buttons — Click SAVE to take
5
CANCEL to abandon them. Clicking either button closes the editable pane.
NOTES:
• Link Local ( ) — DHCP is on by default. When a DHCP server is not
A
accessible, the Link local IP Address, an address in the range of 169.254.1.0 to
169.254.254.255, is assigned to the endpoint when no other address assignment
methods are available.
• MAC Address ( ) — A unique read-only identifier for network connected devices.
B
, , , and
Gateway DNS Server
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
DHCP Off
NAV E 101 DTP Encoder • HTML Operation
are not editable when
DNS Suffix
).
A
changes or
Network Connection
49