Microcom LDS2 Programming Manual page 93

Diagnostics and Troubleshooting
Byte Mode
Responses Text and Verbose Mode Responses
(ASCII Hex)
0x1C >MISSING LABEL<
0x1D >INCOMPLETE FORM<
0x21 >INPUT 1<
0x22 >INPUT 2<
0x30 >SCRIPT ERROR<
0x31 >INVALID PARAMETER<
0x80 >RESTARTED<
0x81 >READY<
0x83 >PAUSED<
0x86 >LABEL/TAG PRESENT<
0x87 >STOCK ADVANCED<
0x8F >STOCK NOT LOADED<
0x90 >RETRACTION DELAY<
0x91 >PRINT DELAY<
0xB0 >FLASH MEMORY LOW<
0xC0 >BUTTON 1 TAPPED<
0xC1 >BUTTON 1 HELD<
0xD0 >TEMPERATURE OUT OF RANGE<
5-6
Definition
Generated if more than one
die-cut label has been
detected.
A complete script did not print
on a >STOCK OUT<
condition.
The Input 1 sensor is active.
See also ^D509
The Input 2 sensor is active.
See also ^D511
An error with the script has
been detected.
The printer has detected an
invalid parameter.
The printer has been powered
on or the power has been
reset.
The printer is in ready to
receive data.
The printer has been paused.
Media has been presented in
a dispense mode.
The media has been
advanced.
The printer was powered up
with out media installed.
The retraction has been
delayed.
The printing has been
delayed.
The Flash memory file space
is 95% full.
The print button has been
pressed.
The print button has been
held.
The print head temperature is
out of operating range.
LDS2 Programming Manual - 880019-0202
Chapter 5