Table of Contents
Advertisement
NAV Displays
Operations
Arc Assist Display
The Arc Assist page helps you to navigate arcs, such as DME arcs in
non-precision approaches or for user-defined arcs used to conduct aerial
searches via increasingly larger circles. Press ENT to get navigation
information about the displayed waypoint. Press SEL to choose a
different waypoint. Choose a Left or Right arc with the Small knob.
From/To/Next Display
The From/To/Next display is shown below. The top line of the display
shows the "FROM" waypoint, i.e. the waypoint you are currently
flying from, and the database that stores the waypoint. The middle line
shows the "TO" waypoint, i.e. the waypoint you are currently flying to,
and the database that stores the waypoint. The bottom line shows the
"NEXT" waypoint, i.e. the waypoint you will be flying to after
arriving at the "TO" waypoint, and the database that stores the
waypoint. After arriving at the To waypoint, the waypoints will
sequence, and the "NEXT" waypoint will become the "TO" waypoint.
In this example, the "FROM" waypoint is airport (ARPT) SLE; the
"TO" waypoint is the PDX VOR, and the "NEXT" waypoint is airport
HIO. For procedural information, see NAV Mode Operations, "Using
The From/To/Next Page" described on page 102.
Navigation Sub-Displays
When the Required Nav Information screen, depicted at the beginning
of the preceding section, Top Level Nav Displays, is displayed,
turning the Small knob displays up to 10 navigation sub-pages (up to
seven without an F/ADS). These sub-pages may be customized in SYS
mode, i.e. you may select the specific navigation items that you want to
appear on each display line. The default displays are depicted below.
68
Advertisement
Table of Contents
