Table of Contents
Advertisement
Operations
Message Displays
Holding At The TO Waypoint
This form of the Arrival Alert is provided when holding at the current
TO waypoint.
Next Leg Is DME Arc
This form of the Arrival Alert is provided when the next TO waypoint is
the end of a DME arc. Use the DME Arc Assist page in NAV mode. Next
Desired Track and Desired Heading are not provided with this alert.
TO Waypoint Sequence
When a waypoint sequence occurs and you have not viewed the arrival
alert, one of the following alerts are provided.
Normal Sequence
The alert is only provided if traveling faster than 5 knots. This reduces
the chance of nuisance alerts after power-up. The new waypoint
identifier, bearing, and desired track are provided.
DME Arc Sequence
This form of the Sequence Alert is provided when the next TO
waypoint is the end of a DME arc in a nonprecision approach.
53
Advertisement
Table of Contents
