Operations
4.
ENT
SEL
DME Arc Assist
See the DME-ARCs (Arc Assist) section in the Approach portion of
this manual. See page 249.
Waypoint Distance Page
This page shows the cumulative distance from your current position to
each waypoint in the active flight plan starting with the active leg. Turn
the Small knob to view the next set of waypoints in your active flight
plan. The waypoint type is shown to the left of the identifier. The
allowable waypoint types are: Airport (a), Intersection (i), NDB (n),
and VOR (v). The waypoint type symbol will not be shown if one of
the following occurs: the waypoint identifier is unknown, it is an
approach waypoint that is not one of the four used types, it is a User
waypoint, the waypoint is not recognized by the current data card's
database, or the data card has been removed.
Waypoint ETE Page
This page displays the cumulative time in hours and minutes from your
current position to each waypoint in the active flight plan, starting with
the active leg. The ETE values will be displayed in minutes and
seconds when the Time To Wpt is less than one hour. Turn the Small
knob to view the next page of waypoints. The time will not be shown
for the same reasons as in the Waypoint Distance page.
Press ENT to start the timer.
Note: pressing SEL while the timer is
running resets the timer and activates
editing.
NAV
NAV
NAV Mode Procedures
102a