Manual Triad Selection - II Morrow Inc. NMC 2001 Operating Manual

Loran Sensor Sub-State
5.
6.
ENT

Manual Triad Selection

The following procedure is used to manually select the Loran triad.
Prior to using this procedure, you must manually select the GRI(s).
Only one triad may be manually selected for each Loran sensor.
1.
SYS
2.
ENT
216
Turn the Large knob to make the GRI
name flash. Turn the Small knob to
display the desired GRI.
Pressing ENT enters the displayed GRI.
Pressing any mode button exits this
function without entering any changes.
In SYS mode, turn the Large knob to
display the Position Sensor page.
Pressing ENT activates the Position
Sensor sub-state functions. Turn the
Large knob to display the Loran Stations
page.
Operations
SYS
SYS
SYS
SYS