NAV Mode Procedures
Inserting and Editing a From/To/Next Waypoint (cont'd)
Action
1.
NAV
2.
SEL
3.
104
Explanation
In NAV mode, turn the Large knob to
display the From/To/Next page. The
current From, To, and Next identifiers
are displayed. Blank lines appear in
spaces where there are no waypoints.
NAV
Press SEL to activate editing. "CHG?"
(Change) appears in place of the Next
waypoint. If no Next waypoint is
displayed, "INS?" (Insert) appears
instead. "CHG?" is used to replace the
waypoint, and "INS?" is used to add a
waypoint. "DEL?" (Delete) will remove
the waypoint.
NAV
Turn the Large knob to choose the
waypoint to change, or the location where
a new waypoint is to be inserted. To insert
a waypoint, turn the Small knob to display
"INS?" "HOLD" may be chosen to replace
"TO". "HOLD" is used to place the Active
flight plan on hold, and prevent waypoint
sequencing. You may also press the
OBS/HLD button when installed.
FROM EUG
TO
INS?
NEXT SLE
NAV
Operations
ARPT
VOR
ARPT