DB Mode Procedures
Creating a User Waypoint by Latitude/Longitude
(continued)
Action
1.
DB
2.
ENT
128
Explanation
In DB mode, turn the Large knob to
display the Create User Waypoint by
Lat/Lon page.
DB
If the maximum of 500 User waypoints
already exist, the display below
appears, and you must delete a User
waypoint before you may create a new
waypoint.
DB
Pressing the ENT button displays an
open User waypoint page. The
waypoint identifier defaults to the next
unused numerical identifier (from #000
to #499). The latitude and longitude
default to the present position, and the
runway length defaults to 0000'.
DB
Operations