Table of Contents
Advertisement
Operations
II Morrow has been informed by the Model 2030
manufacturer (Shadin) that Model 2030 firmware
versions xx.xx.62 and earlier do not support the above
message. See Page 169 for a method to view the firmware
version. Many transducer failures will be indicated by
dashed data fields. Contact Shadin for details.
Low Fuel Warning
This message is set when the estimated time before fuel runs out is less
than a pre-set number of minutes. The number of minutes remaining
when the fuel warning is shown may be edited in System Mode. The
example below starts the warning when 20 minutes of fuel remains.
The reserve tank fuel is not taken into account for this message.
Arrival at Hold Buffer Altitude Message
The display below shows arrival at the Target Hold Buffer Altitude. In
the example below, the Target Hold Altitude is 2,000 feet. The Target
Hold Altitude is the altitude you want to descend/ascend to, and is
adjusted in NAV mode. The Target Hold Buffer is the distance
above/below the Target Hold Altitude at which you want this message
to activate. The Target Hold Buffer Altitude is also adjusted in NAV
mode.
Outside of Hold Buffer Message
The display below shows you are above/below the Hold Altitude. This
message only appears if you have already ascended/descended into the
Target Hold Buffer, and have climbed/descended back out of the
buffer. In the example below, the aircraft is 400 ft below the Hold
Altitude.
NOTE
Message Displays
51
Advertisement
Table of Contents
