Operations
D
3.
ENT
9.
10.
Between EAT and FF285 (Point B)
with a heading of 105°, press
D
OBS/HLD to suspend sequencing.
Press DIRECT-TO twice. Select an
OBS setting of 285° with the Large
and Small knobs and then press ENT
to select an inbound course. Note that
the CDI will be "reverse-sensing" just
as it would when outbound from a
VOR with the OBS set to the inbound
course. (Point C)
At point D, make the procedure turn.
At the intercept of the inbound course
to the FAF, press OBS/HLD to allow
sequencing at the FAF. Waypoint
FF285 now becomes the FAF. (Point E)
Approach Procedures
245