Editing The Flight Timer Trigger Speed - II Morrow Inc. NMC 2001 Operating Manual

Operations

Editing the Flight Timer Trigger Speed

The following procedure is used to edit the flight timer trigger speed.
The flight timer may be set to start at power-up, or when the ground
speed exceeds from 10 to 500 knots. The default (factory) setting is 60
knots. The feature may also be turned off.
1.
SYS
2.
ENT
3.
SEL
4.
Navigation Information Sub-State
In SYS mode, turn the Large knob to
display the Navigation Info page.
Pressing ENT activates the Navigation Info
sub-state functions. Turn the Large knob to
display the Flight Timer Trigger page.
Pressing SEL activates editing.
Turn the Small knob to display the
desired trigger speed. The trigger speed
is chosen in increments of 10 kts. OFF or
ENT
AT POWER-ON may also be chosen.
Press ENT to save the setting.
SYS
SYS
SYS
SYS
195