Table of Contents
Advertisement
Operations
Deleting a User Waypoint
The following procedure is used to delete a User waypoint. This may
be necessary to make room for a new User waypoint.
Action
1.
DB
2.
SEL
Explanation
In DB mode, turn the Large knob to
display the Delete User Waypoint page.
DB
If there are no User waypoints stored,
the display below appears.
DB
The NMC displays the Find Waypoint
to Delete page. Turn the Small knob to
display the desired waypoint. If desired,
you may press SEL to activate
character editing to display the
waypoint; however, this is generally
unnecessary unless there are a large
number of User waypoints.
DB
DB Mode Procedures
139
Advertisement
Table of Contents
