Operations
Activating the Display Test
The following procedure is used to test the NMC display. The test
illuminates every LED (Light Emitting Diode) in the display. If any
LED does not light in response to this test, have the NMC serviced.
Action
1.
SYS
2.
ENT
3.
ENT
System Information Sub-State
Explanation
In SYS mode, turn the Large knob to
display the System Info page.
Pressing ENT activates the System Info
sub-state functions. Turn the Large
knob to display the Test Display page.
Pressing ENT activates display testing.
SYS
SYS
SYS
207