Hold/Continue The From/To/Next Sequencing - II Morrow Inc. NMC 2001 Operating Manual

NAV Mode Procedures

Hold/Continue the From/To/Next Sequencing

The following procedure is used to change the flight plan status to
HOLD, or to resume flight plan sequencing after holding. HOLD
prevents the Active flight plan waypoints from sequencing. While the
flight plan status is HOLD, the NMC continues to show the bearing to
the TO waypoint even after you have passed the waypoint. If you have
passed the TO waypoint, the symbolic airplane on the CDI indicator is
displayed inverted.
Action
1.
NAV
2.
SEL
3.
ENT
106
Explanation
In NAV mode, turn the Large knob to
display the From/To/Next page. The
current From, To, and Next identifiers
are displayed. Blank lines appear in
spaces where there are no waypoints.
NAV
Pressing SEL activates editing. "CHG?"
(Change) appears in place of the Next
waypoint. If no Next waypoint is
displayed, "INS?" (Insert) appears.
NAV
Turn the Large knob to position
"HOLD?" in place of "TO". If "HOLD"
is the current status, "TO?" appears
instead. Pressing ENT enters the status
in the Active flight plan.
NAV
Operations