Fuel At; Using Flight Plan Comments - II Morrow Inc. NMC 2001 Operating Manual

Navigation management computer
Hide thumbs Also See for NMC 2001:
Table of Contents

Advertisement

Operations

FUEL AT

Fuel At is the fuel remaining at the displayed leg's To waypoint. Fuel
At information is only available for the Active flight plan with a
Fuel/Air Data Sensor installed on NAVNET, and a ground speed of
greater than 20 knots. If these inputs are not available, the number is
dashed.
The units of fuel displayed may be edited in System Mode to US Gallons,
Imperial Gallons, Liters, Pounds of Jet Fuel A, Pounds of AvGas, Pounds
of JP4, Kilos of JP4, Kilos of Jet Fuel A, or Kilos of AvGas.

Using Flight Plan Comments

You may edit and save one screen of user-input information for each
flight plan. This information is called the Flight Plan Comment, and is
accessed from a Flight Plan Summary page.
Action
1.
FPL
2.
INFO
Explanation
Press FPL to enter FLIGHT PLAN
mode, then rotate the Large knob to
display the desired Flight Plan
Summary page. All Flight Plan
Summary pages are accessed by
rotating the Large knob in Flight Plan
mode.
Press INFO and turn the Large knob
CCW one position to access the
user-input information for the displayed
flight plan. The FPL light will begin
flashing to remind you that you are
accessing INFO. If the Flight Plan
Comment has been entered, it will now
be displayed.
Flight Plan (FPL) Mode
FPL
FPL
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nmc 2101Apollo nmc

Table of Contents