Table of Contents
Advertisement
2. Now press DIRECT-TO twice. Select 105' with the Small knob as
the desired inbound course and press ENT. The CDI will indicate
FROM and will provide guidance on the 105° outbound radial as per
missed approach instructions.
3. When you reach 3900', begin the climbing right turn.
4. When you reach 4200' or when your bearing to BO matches your
current heading, press DIRECT-TO and then ENT. This will
establish a new inbound course direct to BO.
Point D (Inbound to BO)
Fly inbound on the new direct course to BO. The OBS/HLD
annunciator will remain lighted.
Point E (Missed Approach Hold Point)
As you pass BO, establish the new inbound holding course and enter
the hold. Press DIRECT-TO twice. Select an OBS DTK of 098° with
the Large and Small knobs. Press ENT.
290
Advertisement
Table of Contents
