Table of Contents
Advertisement
3. Use the Arc Assist page as the primary guidance for flying the DME
Arc and manually activate the inbound leg. Press FPL to reach
Flight plan. Turn the Large knob if necessary to reach the active
flight plan. Turn the Small knob to display the "D185O to CF005"
display.
4. Press ENT to start manual leg selection. Press ENT to accept the
displayed leg.
5. Turn the Large knob to the Arc Assist page.
Point B (On the arc between MUGGZ and D1850.
1. Make sure that you are viewing the "Right" Arc Assist page. Turn
the Small knob, if necessary.
2. Use the Arc Assist page and your aircraft heading display to
navigate to the selected inbound leg. The Desired Track (DTK) is
your tangent to the arc on your present radial. For the right turn arc in
this example, there are no other Arc waypoints to identify. If there
were more waypoints, the Arc Assist page will continuously show
the radial and distance from the Arc Reference making them easy to
identify from your approach chart.
296
Advertisement
Table of Contents
