II Morrow Inc. NMC 2001 Operating Manual page 34

Power-Up Sequence
Power-Up Sequence (continued)
If Emergency Search settings restricting runway lengths and/or
surface types and/or lighting requirements are entered, the display
below appears for up to 4 seconds.
To reset the Emergency Search settings, press SEL within 4 seconds,
then press ENT, as shown on the screen below, or press SEL to cancel.
If the 2030 Fuel/Air Data Sensor is installed, the NMC displays the
next screen until SEL is pressed.
Enter the total amount of fuel which is in the airplane's tanks including
reserve, by rotating the Small and Large knobs to edit the displayed
values, then press ENT. If the cursor is flashing on the word "FULL"
when ENT is pressed, the amount of fuel displayed will become the
maximum amount of fuel previously entered, and the cursor will flash
on the number. Pressing ENT again will enter the number as the
current total fuel on board.
20
NAV
NAV
NAV
NAV
Operations