Manually Entering Magnetic Variation - II Morrow Inc. NMC 2001 Operating Manual

Operations

Manually Entering Magnetic Variation

The following procedure is used to edit the magnetic variation anytime
after the power-up sequence is complete. With a datacard installed,
and magnetic variation set to AUTO, the NMC automatically accounts
for magnetic variation. If the datacard is not inserted, you must enter
the magnetic variation during power-up. For the procedure used to
enter magnetic variation during power-up, see Operations, Power-Up
Sequence.
Flow chart
PRESS SYS
TURN TO DISPLAY
THE NAVIGATION INFO PAGE
PRESS ENT
TURN TO DISPLAY THE
MAG VARIATION PAGE
PRESS TO ACTIVATE EDITING
SEL
Navigation Information Sub-State
TURN TO DISPLAY "MANUAL"
TURN TO MAKE THE MAG VARIATION FLASH
TURN TO DISPLAY THE DESIRED MAG VARIATION
TURN TO MAKE THE VARIATION DIRECTION FLASH
TURN TO DISPLAY "E" OR "W"
PRESS ENT
191