Connecting The Power Supply - II Morrow Inc. NMC 2001 Operating Manual

Flight Simulator Apollo NMC
Figure 4 - Apollo NMC Dzus Mount Rear Connections
Figure 3 - Panel Mount Apollo NMC Rear Connections

Connecting the Power Supply

The following procedure is used to connect the NMC to the external
power supply. The NMC must be removed from your aircraft to use the
Flight Simulator.
1. Remove the NMC from the aircraft.
2. Plug the external power supply into a 120 VAC socket.
3. Insert the power cord into the power connector shown in Figure 3 or
4.
334