Table of Contents
Advertisement
DB Mode Procedures
Editing a User Waypoint (continued)
ENT
5.
138
Press ENT to save the changes. If the
waypoint is in an inactive flight plan,
the display below appears for
approximately 3 seconds.
DB
After 3 seconds, or if the waypoint is
not in a flight plan, the display below
appears.
DB
If a duplicate identifier is entered, the
display below appears for
approximately 3 seconds. The NMC
then returns to the waypoint editing
page so you can change the identifier
using the Small and Large knobs.
DB
Operations
Advertisement
Table of Contents
