Power-Up Sequence
Power-Up Sequence (continued)
Failure to pass the datacard check causes the display to show the next
page. The user must then press ENT to continue.
The Owner Name page is displayed for 2 seconds. The procedure for
entering owner information is described in Operations, Entering and
Editing Owner Information on page 209.
When a valid datacard is properly inserted in the datacard slot, the
database name, expiration date, and version number is displayed for 4
seconds.
The display below only appears if the datacard is invalid or not inserted
properly. The magnetic variation value (in bold) is flashing. Rotate the
Small and Large knobs to update the magnetic variation for your
current position, then press ENT to save the displayed value.
18
NAV
NAV
NAV
NAV
Operations