Table of Contents
Advertisement
2. The Altimeter Setting will flash. Turn the Small knob to display the
local barometric pressure and press ENT. Press NAV to return to
NAV mode.
Point A (Inbound to OED from the south)
1. Suspend flight plan sequencing at OED to prepare for a procedure
turn. The combined IAF/FAF waypoint is noted on your Apollo
NMS as IFAF. Press the OBS/HLD button.
2. Verify that the Hold annunciator is ON.
Point B (Outbound on the procedure turn)
1. After crossing OED, the To/From flag will indicate FROM. OED
will remain the active waypoint.
2. Select the desired inbound course to OED. Press DIRECT-TO
twice. Turn the Large and Small knobs to display 162°. Press ENT.
Point C (On the procedure turn)
1. Fly outbound via the 342 radial of OED to execute a procedure turn. A
distance of 2 to 3 nm outbound is recommended in order to allow
adequate distance for the Apollo NMS to transition to Approach
Active as you pass the FAF inbound.
283
Advertisement
Table of Contents
