II Morrow Inc. NMC 2001 Operating Manual page 133

Operations
Waypoint Retrieval by Identifier (continued)
4.
5.
If you see "DUP"on the 3rd line, there are duplicate
facilities with the same identifier. Press SEL and use
the Small knob to view duplicates.
Turn the Large knob to make the
identifier flash. Turn the Small knob to
display the desired character. As you
turn the Small knob, the remaining
characters in the identifier also change
because the NMC only displays
waypoints that exist.
DB
Turn the Large knob to make the next
character in the waypoint identifier
flash. Turn the Small knob to choose
the character. Repeat to choose the
remaining character(s) in the identifier.
The desired waypoint is displayed.
DB
Note
DB Mode Procedures
117