Navigation Info Sub-State Displays - II Morrow Inc. NMC 2001 Operating Manual

SYS Mode Displays
Position Sensors
Pressing ENT when the screen below is displayed provides access to
Loran/GPS sensor settings and data.
Miscellaneous Sensors
Pressing ENT when the screen below is displayed provides access to
Air Data Info, Fuel Info data, and pressure altitude.

Navigation Info Sub-State Displays

Airspace Setup
The navigation information sub-state screens are used to display and
edit various navigation settings. The display below is used to turn
Airspace Alerts ON/OFF.
Airspace Buffers
Airspace Alert provides alert messages based on distance, altitude, and
time. The page below is used to set the airspace buffers. In this
example, you will be alerted when the aircraft is 2 nm from a SUA
(Special Use Airspace), within 500 feet of the floor/ceiling of a SUA,
and are 10 minutes from penetrating a SUA. These settings are the
default (factory) settings.
164
Operations
SYS
SYS
SYS