DB Mode Procedures
Creating a User Waypoint by Radial/Distance (continued)
11.
12.
ENT
134
Turn the Small knob to display the
desired character. Turn the Large knob to
make the next character you want to
change flash. Repeat as necessary to edit
the identifier, latitude, longitude, and
the runway length. The identifier may
contain a maximum of six characters.
DB
Press ENT to store the waypoint in
memory.
DB
If a duplicate identifier is entered, the
display below appears for
approximately 3 seconds. The NMC
then displays the waypoint editing page
so you can change the identifier.
DB
Operations