Table of Contents
Advertisement
Nav Mode Procedures
Displaying Present Position
The NMC constantly updates your present position. Loran GRIs,
triads, and GPS satellites are automatically chosen by the NMC. If
desired, you may enter the GRI/Triad manually in SYS mode.
The following procedure is used to display the position calculated by
each sensor in the system.
Action
1.
NAV
2.
80
Explanation
In NAV mode turn the Large knob to
display the Position Summary page.
This page displays the position
information from the position sensor in
use.
NAV
Turn the Small knob to display the
position provided by each sensor. Only
one sensor is In Use, and the rest are on
Standby.
NAV
If a position sensor is no longer sending
valid information, the Last Valid
Position display, depicted below, is
displayed, and this position is used for
navigation functions.
NAV
Operations
Advertisement
Table of Contents
