Table of Contents
Advertisement
Introduction
· Frequency monitor function
· Weather channels (only in Americas database)
· Built-in intercom function
· Frequency memory and recall functions
- from navigation data base
- eight last used
- eight user stored
· Two microphone inputs
· 12 watt audio amplifier
· Remote flip/flop input
S
C
YSTEM
ONFIGURATIONS
The SL50 and SL60 can be installed in several configurations based upon individual
requirements. This includes with or without the comm transceiver, and VFR or IFR GPS
navigation. This section defines the minimum requirements.
VFR GPS N
AVIGATION
When installed for VFR operation, the SL50/60 requires only the following minimal
connections.
· an A-33 GPS antenna
· power input
The SL50/60 can also be connected to other external devices such as:
· an external non-numeric indicator, such as a CDI or HSI
· external lamp annunciators including "MSG" and "PTK"
· an "OBS/HLD" external annunciator (with switch)
· an autopilot
· a moving map display connected to an RS-232 serial output
When the SL50/60 is installed for VFR, a placard stating "GPS Limited to VFR Use Only" or
an FAA approved equivalent statement must be placed next to the primary indicator
IFR GPS N
AVIGATION
When installed for IFR operation, the SL50/60 requires connections to several external
indicators. The minimum connections for IFR operation is as follows.
· an A-33 GPS antenna
· power input
· an external non-numeric indicator, such as a CDI or HSI
· external lamp annunciators including "MSG" and "PTK"
The following additional connections are recommended, but not required.
· an "OBS/HLD" external annunciator (with switch)
The SL50/60 can also be connected to other external devices such as:
· an autopilot
· a moving map display connected to an RS-232 serial output
4
I
NSTALLATION
I
NSTALLATION
Apollo SL50 / SL60 Installation Manual
Advertisement
Table of Contents
