Table of Contents
Advertisement
3. As soon as FF005, the FAF becomes the active waypoint. The
Approach Active light will begin flashing and the CDI will begin
scaling to approach sensitivity, as you will be within 2 nm of the
FAF when it becomes active.
4. As you cross FF005, verify that the Approach Active annunciator is
lighted indicating that you may continue the approach.
Point E (Between FF005 and MA005)
1. Continue to the Missed Approach Point (MA005).
2. Verify that the OBS/HLD and Approach Active annunciators are
lighted.
Point F (Turning to intercept 165° to MUGGZ)
1. When you reach the Missed Approach Point and you wish to fly the
published Missed Approach procedure, press OBS/HLD as you
start your climbing right turn.
2. The CDI will scale back to Approach Transition CDI sensitivity.
The MAP (MUGGZ) will become the active waypoint.
3. Select a 165° inbound course to MUGGZ. Press DIRECT-TO
twice. Turn the Large and Small knobs to select 165° and then press
ENT.
298
Advertisement
Table of Contents
